Low Intensity Twin Obstruction Warning Light
 The major advantage of having a twin obstruction warning light is that when the service light fails, the lighting switches onto its standby lighting system. This eliminates the eventuality of a complete blackout, during an unlikely circuit failure.
It combines the improved and modern concept of surface mounted solid state lamps technology (High Powered Lighting Diodes) which are procured from market leaders. These, high power high flux, state lamps have an exceptionally long life of 100,000 hours. They consume very less energy and thus ideally suited for Solar Powered Applications.
The LED Aviation warning lights are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of physical or technical damage.
As laid down by the ICAO, we make the use of an efficient secondary optics which generates Lens effect. It gives an omni-directional light beam in horizontal plane & arrests unnecessary light dispersion in vertical plane.
These warning lights are rested inside an improved gasket, which protects them from the attack of dust and moisture. A (bird spike) is positioned over the top of the light to protect the lights from bird droppings.
These lights are built in a Photo controller to provide a 24x7 operation.
QUALITY ASSURANCE:
- Conforms to ICAO standards. (As per annex. 14).
Technical Specifications
Operating Conditions
| |
Will withstand wind in excess of 150 mph (240 kph), (150 knots) |
| |
Fog, Rain |
| |
Humidity :90% |
| |
Electromagnetic Interference Sheilded |
| |
Radio Frequency Interference Sheilded |
| |
Temperatures ranging from (-20°C to +55°C). |
Photometric Data
| Night Mode |
Red |
| Vertical Beam Spread |
> 10 ° |
| Horizontal Coverage |
360 ° |
| "Ground Scatter Light" cut-off angle |
-5 ° |
| Input Supply |
Operating Voltage |
System Operating on DC Volts |
Current (Amp) |
Volt Amps (VA) |
Watts
(V x I) |
| Min |
Max |
Min |
Max |
Min |
Max |
| 220V AC with SMPS Supply |
150V AC |
275V AC |
12 V |
300mA |
500mA |
3.6 |
6 |
6 |
| 24 V |
150mA |
250mA |
3.6 |
6 |
6 |
| 48 V |
75mA |
125mA |
3.6 |
6 |
6 |
| 220V AC (50Hz) |
150V AC |
275V AC |
12 V |
300mA |
500mA |
3.6 |
6 |
6 |
| 24 V |
150mA |
250mA |
3.6 |
6 |
6 |
| 48V |
75mA |
125mA |
3.6 |
6 |
6 |
Light Characteristics
| Body Material |
Compression Molded Glass Fiber reinforced Polyester |
| Lense Material |
Polished Acrylic
|
| Height (mm/inches) |
225 mm |
| Width (mm/inches) |
160 ± 5 mm |
| Mass (Kg/lbs) |
5 Kg Approx. |
Construction of Tower Marking Obstruction Lights
| Lens Material |
Polished Acrylic |
| Sealing |
EPDM Gasket
|
| Weight |
6 Kg Approx. |
Environmental and Electrical
| Temperature Range |
- 20 ° C to + 55 ° C |
| Waterproof |
Through improvised Gaskets and Sealant
|
| Environment Protection Standard for Light |
IP 65 Standard |
| Environment Protection Standard for Control Panel |
IP 55 Standard |
| ICAO Type |
Type "A" |
| Light Source |
LED Cluster
|
| Light Color |
RED |
| Intensity |
> 10 cd |
| Horizontal Divergence |
360 ° |
| Lamp Life |
> 1,00,000 hrs approx. |
| Radial Emission |
As per CISPR 11 |
Shipping Specifications
Shipping details for medium intensity white flashing obstruction lights.
| Carton No. |
Carton Description |
Net Weight (KG) |
Gross Weight (KG) |
Dimn. |
Vol. CBM |
| 1 |
Low intensity twin light |
13 |
24 |
550x380x450 |
0.094 |
|